E01L0002 Human L selectin ELISA kit
The Human L selectin ELISA kit can be used to identify samples from the human species. L selectin can also be called L selectin, L-selectin, SELL, CD62L, LAM1, LECAM1, LEU8, LNHR, LSEL, LYAM1, PLNHR, TQ1, selectin L, CD62 antigen-like family member L, LAM-1, Leukocyte adhesion molecule 1, Leukocyte adhesion molecule 1, Leukocyte-endothelial cell adhesion molecule 1, Leukocyte-endothelial cell adhesion molecule 1, gp90-MEL.
Product Information | |
Cat. No. | E01L0002 |
Product Name | Human L selectin ELISA kit |
Species | Human |
Product Size | 48 Tests / 96 Tests |
Concentration | 1.0-25 ng/ml |
Sensitivity | 0.1 ng/ml |
Principal | Sandwich ELISA |
Sample Volume | 50 ul |
Sample Type | Serum, plasma, cell culture supernatants, body fluid and tissue homogenate |
Assay Time | 90 minutes |
Platform | Microplate Reader |
Conjugate | HRP |
Detection Method | Colorimetric |
Storage | 2-8°C |
Kit Components | ||
MATERIALS | SPECIFICATION | QUANTITY |
MICROTITER PLATE | 96 wells | stripwell |
ENZYME CONJUGATE | 10.0 mL | 1 vial |
STANDARD A (0.5mL) | 0 ng/mL | 1 vial |
STANDARD B (0.5mL) | 1.0 ng/mL | 1 vial |
STANDARD C (0.5mL) | 2.5 ng/mL | 1 vial |
STANDARD D (0.5mL) | 5.0 ng/mL | 1 vial |
STANDARD E (0.5mL) | 10 ng/mL | 1 vial |
STANDARD F (0.5mL) | 25 ng/mL | 1 vial |
SUBSTRATE A | 6 mL | 1 vial |
SUBSTRATE B | 6 mL | 1 vial |
STOP SOLUTION | 6 mL | 1 vial |
WASH SOLUTION (100 x) | 10 mL | 1 vial |
BALANCE SOLUTION | 3 mL | 1 vial |
Principle of the Assay |
L selectin ELISA kit applies the quantitative sandwich enzyme immunoassay technique. The microtiter plate has been pre-coated with a monoclonal antibody specific for L selectin. Standards or samples are then added to the microtiter plate wells and L selectin if present, will bind to the antibody pre-coated wells. In order to quantitatively determine the amount of L selectin present in the sample, a standardized preparation of horseradish peroxidase (HRP)-conjugated polyclonal antibody, specific for L selectin are added to each well to “sandwich” the L selectin immobilized on the plate. The microtiter plate undergoes incubation, and then the wells are thoroughly washed to remove all unbound coL selectinnents. Next, substrate solutions are added to each well. The enzyme (HRP) and substrate are allowed to react over a short incubation period. Only those wells that contain L selectin and enzyme-conjugated antibody will exhibit a change in color. The enzyme-substrate reaction is terminated by addition of a sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450 nm. A standard curve is plotted relating the intensity of the color (O.D.) to the concentration of standards. The L selectin concentration in each sample is interpolated from this standard curve. |
Coefficient of Variance | Intra Variation% ＜10% | |
Inter Variation% ＜12% | ||
Recovery | 95-102% | |
Linearity | Diluent Ratio | Range % |
1:2 | 93-105 | |
1:4 | 88-106 | |
1:8 | 86-108 | |
Specificity/Cross-reactivity | No significant cross-reactivity or interference between L selectin and analogues was observed. | |
E01L0002 has been referenced in the below publications：
Effects of recombinant human growth hormone on the expression of CD47, L-selectin and advanced oxidation protein products in elderly patients with multiple organ dysfunction syndrome.
Related Bluegene Biotech Products
