VE-L0010-3D1 Vero Host Cell Protein (OneStep) ELISA Kit, G3(Applicable to Products Derived from Cell Lysates) is for research use only; it should not be used in clinical diagnostic procedures.
This kit is intended for the quantitative Measurement of Vero HCP Residues in Fermentation Broth, Purification Process Intermediates and End-Product.
| Product's Information | |
| Cat. NO. | VE-L0010-3D1 |
| Products Name | Vero Host Cell Protein (OneStep) ELISA Kit, G3(Applicable to Products Derived from Cell Lysates) |
| Species | Vero |
| Product Size | 96 Tests |
| Concentration | 3.125-200ng/mL |
| Sensitivity | LOD: 1.56 ng/mL; LOQ: 3.125 ng/mL |
| Principal | Sandwich ELISA |
| Sample Volume | 100 ul |
| Sample Type | ELISA Kit for the quantitative Measurement of Vero HCP Residues in Fermentation Broth, Purification Process Intermediates and End-Product |
| Assay Time | 2 hours and 15 minutes |
| Platform | Microplate Reader |
| Conjugate | HRP |
| Detection Method | Colorimetric |
| Storage | 2-8°C |
Kit Components | ||
Reagents | Specification | Quantity |
Pre-Coated Microplate (Detachable) | 96 wells | 1 plate (Keep Sealed) |
Standard (Stock Solution) -500ug/ml | 50ul | 1 tube |
Detection antibody (100×) | 150ul | 1 tube |
TMB Substrates | 10ml | 1 vial (Avoid Light) |
Stop Solution | 10ml | 1 vial |
Wash Solution (20×) | 10ml | 5 vial |
Diluent Buffer (10×) | 10ml | 1 vial |
Plate Sealer | 4 pieces | |
Instruction Manual | 1 | |
Principle of the Assay |
This ELISA kit adopts the solid phase sandwich Enzyme-Linked Immunosorbent Assay. The microplate has been pre-coated with capture antibodies to prepare solid-phase antibodies. The sample antigen and the HRP-conjugated detection antibodies are added simultaneously to the microplate wells, forming a capture antibody-antigen-detection antibody complex. After washing, the conjugates uninvolved in the reaction are removed, and then a TMB substrate solution is added to the wells to incubate. TMB substrate solution turns blue after the oxidation of HRP and finally turns yellow immediately after adding the stop solution. The color of the TMB substrate positively correlated with the antigen bound in the initial steps. Measure the absorbance (OD value) at 450nm using a microplate reader, and create a standard curve along with the corresponding concentrations. Then, by inputting the OD values of the samples into the standard curve equation, calculate the concentration of the target protein in the sample. |
CV | Intra Variation%: 5-7 | |
Inter Variation%: 7-8 | ||
Specificity | Sample | Cross-reactivity (%) |
HEK293 | <3.5% | |
E.coli HCP | Not Detectable | |
Pichia Pastoris HCP | Not Detectable | |
Related Bluegene Biotech Products
BlueGene Biotech News
